Empresa China de Herramientas de Precisión
Traducción
English中文(简体)FrançaisРусскийEspañol

Functional Contact Faces

Copper CNC Turned Parts

Precision copper turned components with functional contact faces, controlled edges and carefully reviewed clamping requirements.

Proceso
Review support, gripping positions and edge control
Materiales
Specify copper grade and the delivered surface condition
Cantidad
State the required quantity for workholding review
Inspección
Verify the finished contact zone and any agreed test criteria

Product Overview

GPT Precision manufactures custom copper components according to customer drawings, including turned contacts, mangas, terminals and other rotational parts.

Copper grade, component geometry and final surface condition influence machining and handling requirements.

For components with electrical or mechanical contact surfaces, even small edge or surface defects may affect assembly performance.

Key Features

  • A burr around an adjacent hole may prevent two mating faces from contacting as intended.
  • An excessive edge break may reduce the usable contact area, while a gripping mark may locally deform the surface.
  • The drawing should identify the functional contact zone and specify relevant edge, burr and surface requirements.

Manufacturing Considerations

  • Thin or easily deformed copper features require suitable support during machining.
  • Clamping positions and loads should be reviewed to reduce the risk of unwanted distortion.
  • Tool selection, chip control and handling should be matched to the specified copper grade and component geometry.

Control de calidad & Inspección

  • After deburring and any specified finishing, inspect the contact face and relevant dimensional features according to the approved drawing.
  • Where electrical contact resistance must be verified, the test arrangement, mating hardware, contact force and acceptance criteria should be agreed for the project.
  • Dimensional conformity alone should not be described as proof of electrical performance.

Specifications to Confirm

Contact zoneIdentify the mating area and limits for burrs, edge breaks and gripping marks.
Electrical requirementWhere specified, define contact resistance and the assembled test condition.

Assembly Considerations

Face contact

Check that a burr at the adjacent hole cannot hold the mating faces apart.

Request a Copper Turning Quote

Proveer el dibujo, copper grade, quantity and required contact-surface condition. Identify any critical edge, dimensional or electrical acceptance requirements.