Functional Contact Faces
铜制CNC车削零件
Precision copper turned components with functional contact faces, controlled edges and carefully reviewed clamping requirements.
- 工艺
- Review support, gripping positions and edge control
- 材料
- Specify copper grade and the delivered surface condition
- 数量
- State the required quantity for workholding review
- 检验
- Verify the finished contact zone and any agreed test criteria
产品概览
GPT Precision manufactures custom copper components according to customer drawings, including turned contacts, sleeves, terminals and other rotational parts.
Copper grade, component geometry and final surface condition influence machining and handling requirements.
For components with electrical or mechanical contact surfaces, even small edge or surface defects may affect assembly performance.
主要特征
- A burr around an adjacent hole may prevent two mating faces from contacting as intended.
- An excessive edge break may reduce the usable contact area, while a gripping mark may locally deform the surface.
- The drawing should identify the functional contact zone and specify relevant edge, burr and surface requirements.
制造注意事项
- Thin or easily deformed copper features require suitable support during machining.
- Clamping positions and loads should be reviewed to reduce the risk of unwanted distortion.
- Tool selection, chip control and handling should be matched to the specified copper grade and component geometry.
Quality Control & 检验
- After deburring and any specified finishing, inspect the contact face and relevant dimensional features according to the approved drawing.
- Where electrical contact resistance must be verified, the test arrangement, mating hardware, contact force and acceptance criteria should be agreed for the project.
- Dimensional conformity alone should not be described as proof of electrical performance.
需确认的规格
| Contact zone | Identify the mating area and limits for burrs, edge breaks and gripping marks. |
|---|---|
| Electrical requirement | 在指定位置, define contact resistance and the assembled test condition. |
装配注意事项
Face contact
Check that a burr at the adjacent hole cannot hold the mating faces apart.
Request a Copper Turning Quote
Provide the drawing, copper grade, quantity and required contact-surface condition. Identify any critical edge, dimensional or electrical acceptance requirements.









