中国精密工具公司
翻译
English中文(简体)FrançaisРусскийEspañol

液态硅胶模具

» Liquid Silicone Rubber Molding

Custom silicone components & complete molds

液态硅胶模具

Custom Silicone Components for Sealing, Flexibility & Functional Performance

GPT Precision provides custom liquid silicone rubber (LSR) molding services for components manufactured to customer drawings and specifications. We supply both finished LSR parts and complete LSR molds.

PHOTO TO FOLLOWCustom LSR seals, membranes & protective componentsApproved production photography pending
Functional review

Start with what the part needs to do.

Connect material properties, critical geometry, assembly fit, and operating conditions before committing to tooling.

密封Compression and mating surfaces
FlexibilityMovement and elastic recovery
配合Critical geometry and assembly
服务Temperature, media, and repeated use

LSR Parts or a Complete Mold

定制液体硅胶成型零件

根据您的图纸和材料规格采购成品零件. 确定数量, 关键特征, 外观, 样品批准, 以及初次和重复生产的检验要求.

完整的液体硅胶模具

为您指定的生产设施采购完整模具. 提供接收机和材料输送接口要求, 以及试模, 验收, 移交, 和文档需求.

State whether your inquiry covers 成品零件, 完整模具, 或两者. 应在双方同意的范围内记录模具所有权, 包括试模, 维护责任, 以及任何转让要求.

定制液体硅胶成型组件

零件名称是起点. 其在成品组装中的功能决定了材料和制造要求.

PHOTO TO FOLLOW典型的硅胶组件类别Approved production photography pending

密封件 & 垫片

Molded seals and custom gaskets for mating surfaces. Review compression, groove geometry, compression set, service media, and leakage requirements.

Membranes & Diaphragms

Flexible components that deflect or respond to pressure. Define thickness, movement, pressure differential, repeated-use requirements, and tear-sensitive transitions.

Valves & Flow-Control Components

Flexible valve elements and sealing discs. Identify opening and closing behavior, seat geometry, pressure conditions, and fluid exposure.

Protective & Contact Components

Covers, boots, pads, buttons, and protective interfaces. Consider retention, tactile response, surface texture, environmental exposure, and appearance.

LSR Material Selection

Hardness alone does not define sealing performance, tear resistance, compression set, or durability. Specify the conditions in which the finished part will work.

Property Why it matters Information to provide
Hardness Flexibility, deformation, and contact response 目标硬度, 公差, 或参考样品
拉伸 & 撕裂性能 拉伸, 薄特征, 及脱模 预期应变, 特征几何形状, 及失效关注点
压缩永久变形 持续压缩下的行为 压缩, 温度, 及使用期限
Temperature & media 操作环境的适用性 温度范围, 暴露时间, 流体, 及清洁剂
颜色 & 外观 可见和接触表面 颜色, 透明度, 纹理, 及外观限制

通用硅橡胶(LSR)

选择满足所需机械和环境条件的等级.

特定应用等级

确定用于预期用途的支持文档和材料规范, 包括相关的医疗或食品接触要求.

特种等级

讨论光学性能, 改性化学耐受性, or other specific performance requirements.

These categories describe material-selection possibilities, not a list of grades automatically available for every project. Provide the manufacturer and exact grade where known; otherwise, describe the required performance.

Design for LSR Molding

Low-viscosity flow and elastic behavior create distinct requirements for tooling, part release, and finished-part acceptance.

Concept section showing a flexible sealing lip between mating surfacesFlexible lipContact areaWall sectionMating geometry + 材料 + compression
Concept section only — not a customer part or a validated seal design.

Define the functional surfaces.

Mark sealing regions, mating features, and cosmetic faces on the drawing. These priorities guide the tooling and inspection review.

Wall Thickness & Transitions

Review thin membranes, flexible lips, 和较厚的部分一起. 填充, 固化, deformation, 和脱模取决于所选材料和几何形状.

分型线 & 飞边

液态硅胶可以流入非常小的缝隙. 识别易产生飞边的密封唇和界面, 并在模具设计前确认可接受的边缘条件.

倒扣 & 脱模

弹性允许某些倒扣释放, 但深槽或薄壁部分可能会过度拉伸或撕裂. 检查拔模斜度, 脱模方向, 以及周围几何结构.

收缩 & 尺寸

使用材料- 和特定工艺的公差. 识别关键尺寸, 基准点, 测量条件, 以及任何所需的夹具.

浇口, 排气孔 & 表面

在考虑功能区域的同时考虑填充和空气排出. 识别浇口痕迹或表面缺陷不可接受的位置.

液态硅胶或热塑性弹性体?

决策因素 LSR 热塑性弹性体
加工 在加热模具中固化的热固性材料 通常通过加热熔融处理并通过冷却固化
Service performance Evaluate the grade for temperature, media, and compression set Compare the chosen TPE family under equivalent conditions
Reprocessing Cured material cannot be remelted Some grades permit melt reprocessing, subject to restrictions
Application evidence Documentation must match the grade and intended use Documentation must match the grade and intended use

Compare candidate grades against the same operating conditions. Neither material family is universally better.

From Drawing Review to Production

Review Requirements

Provide drawings, part function, 材料要求, operating conditions, and quantities. Identify unresolved design decisions.

Define Material & Tooling

Review the grade, cavity arrangement, 制造方法, and approval requirements. For complete molds, include receiving-equipment compatibility.

Evaluate Initial Samples

Check dimensions, 外观, 材料要求, and agreed functional performance. Identify any tooling, 工艺, 材料, or design changes.

Approve the Supply

Confirm the approved revision and deliverables: production parts with agreed inspection, or a complete mold with agreed trial and handover records.

LSR is typically metered and mixed as a two-component material, injected into a heated mold, and cured. Unlike conventional thermoplastic molding, it sets through curing rather than melt cooling. Tooling investment, cavity arrangement, quantities, and inspection needs should be evaluated together.

质量 & Functional Verification

Link approval criteria to what the component must do. Dimensions alone may not establish the performance of a flexible part.

尺寸 & 外观

Review critical dimensions, 轮廓, 表面状况, flash, and drawing-defined features. Agree measurement methods, fixtures, and support conditions where required.

Material Verification

Confirm the specified grade and required supporting records. Where hardness or other properties form part of acceptance, define the test method and limits.

Functional Evaluation

Project requirements may include leakage, compression recovery, movement, repeated actuation, assembly fit, or exposure testing. Availability, methods, limits, and reporting are agreed per order.

Records & Traceability

Specify material certificates, dimensional reports, first-article records, or batch traceability during quotation. Establish documentation scope before production.

PHOTO TO FOLLOWInspection of an LSR componentApproved production photography pending

Inspection methods and support conditions should avoid unintended deformation of flexible parts.

Common Engineering Questions

Prepare the initial review around your drawing, intended use, and acceptance requirements.

What hardness is suitable for my component?

Hardness depends on function, geometry, compression, and the operating environment. Provide a specified grade or Shore A value where known; otherwise, describe the required behavior and include reference samples if available.

Can you supply a complete LSR mold?

是的. GPT Precision supplies both finished LSR components and complete LSR molds. For a mold intended for your facility, include receiving-equipment interfaces, trial requirements, acceptance criteria, and handover documentation.

Can LSR be molded with plastic or metal components?

Selected grades and substrates can support multi-material components. Review substrate compatibility, processing temperature, bonding or mechanical retention, geometry, and performance for the specific project.

Does LSR require post-curing?

Requirements depend on the material manufacturer’s guidance, processing conditions, and application. Where needed, define the treatment and acceptance criteria in the specification.

Can LSR meet medical or food-contact requirements?

Specific grades may have documentation for particular applications. Suitability must be established for the exact grade, intended use, processing conditions, and required evidence. The terms silicone, LSR, or platinum-cured alone do not establish compliance.

Discuss Your LSR Molding Project

Custom LSR components and complete molds, with the supply scope defined around your project.

Part Definition

Send the 2D drawing or 3D model, 修订, 关键尺寸, and sealing or mating surfaces. Include assembly information where it clarifies function.

Material & Performance

Specify the grade or hardness, 颜色, operating temperature, service media, and compression or movement requirements.

质量 & Approval

Identify sample approval criteria, testing, 检查, documentation, and applicable material requirements.

Supply & 数量

State parts, 完整模具, 或两者. Include quantities, repeat demand, milestones, and mold receiving-equipment details where applicable.

Share your drawings and project requirements to begin a manufacturing review. If the material or design is still open, identify the decisions that need further discussion.