Datum Transfer for an Offset Slot
CNC Turning and Secondary Milling Examples
Combining turned geometry and milled features while maintaining the required datum relationships across operations.
- Proceso
- Review turning and secondary milling against the specified datums
- Materiales
- Specify grade, stock condition and final surface requirements
- Cantidad
- State the required quantity for setup comparison
- Inspección
- Check slot offset, axial position and any angular alignment
Product Overview
Some custom components combine rotational features with slots, caras planas, holes or other non-rotational geometry.
A stepped shaft with an offset slot provides a useful example of how turned and milled features must be related.
Turning establishes the coaxial diameters and shoulders, while milling creates the offset slot.
Key Features
- The specified shaft diameter may establish the datum axis for slot location.
- A designated shoulder can control the slot's axial position.
- Where the slot must align with an existing flat or hole, an angular reference is also required.
- These relationships must be defined by the drawing rather than assumed from the machining sequence.
Manufacturing Considerations
- A turning arrangement with suitable driven tooling may allow the slot to be machined without removing the part, if geometry and access permit.
- Alternatively, a separate milling fixture may provide better support or access.
- In that case, the fixture must reproduce the specified datum relationships.
- The preferred route depends on feature access, tolerancias, workholding and manufacturing efficiency.
Control de calidad & Inspección
- After turning, milling and required deburring, the finished part is checked against the drawing.
- Critical checks may include slot offset from the datum axis, axial position from the reference shoulder and angular alignment where specified.
Specifications to Confirm
| Datum axis and shoulder | Identify the diameter and shoulder face used to locate the slot. |
|---|---|
| Slot position | Specify offset, axial location and angular alignment where required. |
Assembly Considerations
Milling setup
Where a separate fixture is used, confirm it can reproduce the drawing datums.
Discuss Your Turned and Milled Component
Send your drawing with the rotational datums, milling features and critical positional requirements identified. We can review the combined manufacturing approach and inspection needs.











