Drawing-Controlled CNC Parts
Drawing-Based Custom CNC Parts
Custom CNC manufacturing guided by approved drawings, material requirements and clearly defined functional interfaces.
- Proceso
- Machining route based on the approved drawing and CAD model
- Materiales
- Grado, condition and finish per approved drawing
- Cantidad
- Prototype, batch and repeat-order quantities for review
- Inspección
- Critical features checked in the specified acceptance condition
Product Overview
GPT Precision manufactures custom machined components for prototypes, small batches and repeat production.
We review customer drawings, 3D models, material specifications and critical features to define an appropriate manufacturing approach.
The approved technical requirements establish the basis for machining and inspection.
Key Features
- Identify mating faces, locating steps and any interface controlled by the finished dimensions.
Manufacturing Considerations
- A discrepancy between a 2D drawing and a 3D model can affect feature geometry, fit or manufacturing decisions.
- Before programming, the affected feature and conflicting requirements should be identified.
- The applicable technical authority must confirm the intended design and approved revision.
- The agreed information is then used to guide manufacturing and acceptance.
- Neither the drawing nor the CAD model should automatically override the other without considering the project's specified document hierarchy.
- Consider a machined locating step that receives a surface coating.
- The manufacturing route must account for the specified finishing condition when establishing the machined geometry.
Control de calidad & Inspección
- If the finished width controls assembly fit, the drawing should define whether the dimensional requirement applies before or after coating.
- Critical features are checked from the required drawing datums in the specified acceptance condition.
- For repeat orders, the approved documentation should be referenced again.
- Changes affecting geometry, material, surface finish or critical inspection requirements must be reviewed before production.
Specifications to Confirm
| Approved files | Confirm the drawing revision and corresponding CAD model. |
|---|---|
| Finish allowance | Specify the condition in which the fit dimension applies. |
| Inspection records | Identify the results needed for acceptance and repeat orders. |
Assembly Considerations
Mating interface
Mark the surfaces that locate the part in the assembly.
Finished fit
Identify any clearance affected by the coating.
Related Products
Request a Custom CNC Quote
Send your current drawing and any available 3D model, along with material requirements and estimated quantities. Identify critical interfaces and any differences between drawing and model information. We will review the project requirements before confirming the quotation scope.
