中国精密工具公司
翻译
English中文(简体)FrançaisРусскийEspañol

Near-Tool Support for Slender Parts

Swiss-Type CNC Turning Services

Precision machining for small, slender and complex turned components requiring carefully planned bar support and cutting sequences.

工艺
Assess Swiss-type turning against the profile and support needs
材料
Confirm bar grade, 直径, roundness and straightness requirements
数量
State the quantities for the proposed machining arrangement
检验
Check critical dimensions after cutoff and required finishing

产品概览

GPT Precision provides Swiss-type CNC machining for suitable small-diameter and slender precision components.

Applications may include miniature shafts, pins, sleeves, threaded parts and components with multiple axial features.

Process suitability depends on component geometry, bar stock condition, material and required secondary operations.

主要特征

  • In a guide-bushing arrangement, the bar is supported close to the cutting tool.
  • This can help control unsupported length during suitable turning operations.
  • The bar diameter, roundness and straightness must be compatible with the proposed guide-bushing arrangement.
  • The bar must feed reliably while retaining appropriate support.

制造注意事项

  • Stepped components may contain shoulders, reduced diameters and grooves.
  • The machining sequence must consider whether a previously reduced section could enter a support location intended for the original bar diameter.
  • If the proposed sequence compromises support or access, alternative operation sequences or turning arrangements should be evaluated.
  • Not every component requires a guide-bushing configuration.

Quality Control & 检验

  • Depending on the component and machine configuration, the manufacturing plan may include additional operations for cross-features or end details.
  • After cutoff and required finishing, dimensions and features are checked in the specified acceptance condition.
  • The drawing determines which diameters, shoulder locations, 槽, threads and form requirements are critical.

需确认的规格

Bar stockProvide the required stock form, grade and dimensional specification.
Axial profileIdentify reduced diameters, 肩部, grooves and the finished datum face.

装配注意事项

Application fit

Use the slender geometry and secondary features to review whether guide-bushing support is suitable.

Request a Swiss-Type Turning Quote

Provide the component drawing, material grade, quantities and critical dimensions. If the bar stock form or specification is mandatory, include it in the purchasing requirements. We will review the appropriate machining arrangement for the part.