中国精密工具公司
翻译
English中文(简体)FrançaisРусскийEspañol

Press Compatibility and Die Handover

Standalone Stamping Die Examples

Standalone stamping dies manufactured around receiving-press compatibility, trial requirements and documented handover conditions.

工艺
Standalone stamping die with an agreed pre-shipment trial
材料
Trial sheet grade and thickness per specification
数量
Die quantity and trial sample count per project
检验
Press interface review and trial-piece approval

产品概览

GPT Precision manufactures standalone stamping dies according to approved project requirements.

A die must not only produce acceptable parts during a trial; it must also be compatible with the receiving production equipment.

This requires reviewing the intended press and operating arrangement before finalizing the tooling design.

主要特征

  • The die mounting pattern should be checked against the receiving press specifications.
  • Die closed height and the press's available shut-height range must be compared using corresponding reference surfaces and the intended bolster or spacer arrangement.
  • Other relevant requirements may include feed direction, available stroke, material entry, part removal and scrap clearance.

制造注意事项

  • Trial requirements are agreed for each project.
  • The trial basis should identify the applicable drawing revision, sheet material, 厚度, press arrangement, feed conditions and required sample quantity.
  • Use the receiving press specification to check die compatibility. Record and review differences between the agreed pre-shipment trial setup and the receiving press setup that could affect transfer.

Quality Control & 检验

  • Trial parts are inspected against the approved drawing and agreed criteria.
  • Requirements may include hole dimensions, formed geometry, burr limits and other critical features.
  • Once the agreed pre-shipment trial is complete and the trial samples are approved, the die is packed. The customer arranges collection and transport.
  • Handover documents, setup information and any additional acceptance conditions should be confirmed before transfer.

需确认的规格

Receiving pressProvide the mounting pattern and usable press dimensions.
Die closed heightIdentify the reference surfaces and intended bolster or spacer arrangement.
Feed and clearanceConfirm stock entry, feed direction, part removal and scrap clearance.
Trial setupAgree trial equipment, drawing revision, sheet grade, thickness and feed conditions.
Trial samplesConfirm sample quantity, critical dimensions and applicable edge or burr criteria.
HandoverAgree the trial records and transfer documents. After sample approval, the die is packed for customer-arranged collection and transport.

装配注意事项

Mounting and Shut Height

Compare the die mounting arrangement with the receiving press and check closed height against the available shut-height range.

Stock, Parts and Scrap

Review feed alignment and the paths for part removal and scrap clearance in the intended setup.

Request a Stamping Die Quote

Send your part drawing, sheet-metal specification, expected production volume and receiving press information. Include existing die drawings or machine-interface requirements where available.