Hidden Edges and Inspection Access
Stainless Steel CNC Turned Parts
Stainless steel turned components with intersecting features requiring controlled chip removal, deburring and inspection access.
- Процесс
- Review the cross-hole, internal groove and deburring sequence
- Материалы
- Confirm stainless steel grade and final surface requirements
- Количество
- State quantity and any project-specific inspection scope
- Инспекция
- Confirm access to verify the specified hidden-edge limit
Обзор продукта
GPT Precision manufactures stainless steel turned components according to customer drawings.
Parts may contain bores, канавками, плечиками, threads and features requiring secondary drilling or milling operations.
The manufacturing approach is reviewed against the specified stainless steel grade, geometry and final surface requirements.
Ключевые особенности
- Consider a turned component with a cross-hole intersecting an internal groove.
- The intersection may create a burr or sharp edge that is difficult to reach after machining.
- Before selecting the operation sequence, three access requirements should be considered: chip evacuation, deburring-tool access and final inspection visibility.
Производственные соображения
- The cutting sequence should allow chips to be removed without leaving unwanted material in the internal passage.
- A deburring tool may reach the feature through the bore or cross-hole, but must not damage adjacent functional surfaces.
- Where the intersection is close to a sealing edge, the deburring approach requires particular care.
Контроль качества & Инспекция
- A borescope may support visual examination where its field of view is suitable.
- Однако, a visual check does not automatically verify a numerical burr-height or edge-break limit.
- If such a limit is specified, the inspection method must be capable of evaluating the relevant feature at its actual depth.
- When access is inadequate, the issue should be addressed during drawing and process review.
Спецификации для подтверждения
| Intersection geometry | Provide a section view locating the bore, groove and cross-hole. |
|---|---|
| Edge acceptance | Specify visual criteria or a numerical burr-height or edge-break limit. |
Соображения при сборке
Adjacent sealing edge
Where present, define the surface that deburring must protect.
Request a Stainless Steel Turning Quote
Send the drawing and sectional views, identifying internal intersections, specified edge conditions and any critical inspection requirements.











