Custom Machined Plate
CNC-Machined Multi-Pocket Plate
This plate combines multiple recessed pockets, a central circular opening and perimeter mounting holes. Pocket geometry, remaining wall thickness and flatness requirements influence workholding, material removal and inspection planning.
- Process
- Pocket machining and workholding review
- Материалы
- Grade and blank thickness per drawing
- Количество
- Sample and batch quantities
- Inspection
- Pocket depths and mounting references
Product Overview
The recessed pockets are separated by ribs and surrounding walls. Their depth, corner geometry and relationship to the mounting face affect tool access and the machining sequence, particularly where wall thickness or flatness is controlled.
Key Features
- Multiple recessed pockets separated by ribs
- Large central circular opening
- Perimeter mounting-hole pattern
Manufacturing Considerations
- Review cutter reach and internal radii for the specified pocket depths.
- Plan clamping and material removal around remaining wall thickness and flatness requirements.
- Maintain access to the designated reference surfaces for machining and inspection.
Quality Control & Inspection
- Measure pocket depths from the specified reference face.
- Check the central opening and mounting holes against the drawing datums.
- Verify specified mounting-face flatness in the agreed inspection condition.
Specifications to Confirm
| Pocket geometry | Depths, internal radii and minimum wall thickness |
|---|---|
| Central opening | Diameter and position relative to specified datums |
| Mounting face | Flatness and surface requirements |
| Material and blank | Класс, condition and starting thickness |
| Inspection | Critical depths, hole positions and flatness checks |
Assembly Considerations
Mounting Face
Identify the surface that contacts the mating component.
Pocket Clearance
Check available space above pocket floors and around ribs.
Fastener Access
Allow sufficient access around perimeter mounting holes.
Related Products
Need a Custom Multi-Pocket Plate?
Share your drawing and a section view showing pocket depths, remaining wall thickness and any critical mounting-face requirements.
